Emulsion MINERSCREEN UNIVERSAL is a universal emulsion. It is intended for use with water-based, solvent and plastisol inks. 0.9kg diazo sensitizer. Apply in a dark room where is a yellow light. Add water to the small diazo bottle and shake well, then mix the whole dose with the emulsion MINERSCREEN UNIVERSAL, stir well and leave for a couple hours. Apply on a clean, degreased and dry screen. To ensure good adhesion of the emulsion to the mesh, the mesh must be degreased with a screen degreaser before each application of the emulsion. Apply 1-2 coats on each side of the screen. Dry at 30-35 ° C for 40-60 minutes, depending on the thickness of the applied layer. The exposure time can be affected by various factors – the type of lamp, the distance between the lamps and the mesh count and the thickness of the emulsion. To determine the correct lighting time, we recommend doing a few tests with Exposure calculator. Manufacturer example / recommendation: Mesh fineness: 120 T Lamp: UV metal halogen 5000W Distance: 1 m Layers: 1-2 Exposure time: 55 seconds After lighting, soak the mesh in water for 5 minutes, then rinse it with a medium pressure water jet. Then dry the sieve at 35 ° C. Use an emulsion remover to remove the emulsion. before each application of the emulsion. TDS: Minerscreen Universal diazo U_emulsija
